Jaegers 6" f/10 "GJD" OTA Construction - Knife-Edge Baffles (baffle rack assembly - 8)
 

 The completed baffle rack notched for sliding weight bar nuts - 48 (Click to see an enlarged image.)

 
From the objective of the baffle rack, here is a shot of showing the completed notches cut into the baffles for the counterweight system internal nuts. As you can see, notches were cut in all four (4) knife-edge baffles. The rack should easily slide pass the nuts inside the main tube during installation. Time to cut the notches for passive of the guide scope internal nuts.