Before we go on to the refinement and finishing process of the four
(4) knife-edge baffles for the "GJD" refractor, I wanted to share this
image showing underside of the Bosch laminate trimmer/ router and
Jasper circle guide to let you see what it looks like after milling the
groove in one of the baffles. So, as I made note of on one the
previous pages at the start of the milling process of the knife-edge
baffles, periodically you will need to pause to removed the fused
debris around the v-groove bit. Be very careful! This debris can get a bit
hot to the touch, so be sure to let it cool sufficiently before
attempting to remove
it.
Okay, now lets go pretty up those baffles!
|
|
