|
Set up with a 220-grit sanding disk, as seen in the image above, I
used my random orbital sander to create a dull matte finish to the
fronts and backs of all four (4) knife-edge baffles for the Jaegers 6"
f/10 "GJD refractor. This step preps their surfaces for priming and
painting with Rustoleum Camouflage flat black to flock. But, before we
can start priming and painting, we will need to assemble the rack
(called the baffle rack) that will properly support and space the
individual knife-edge baffles for later installation into the main
tube. |
|
