|
Using tiny cone-shaped tubes of painters tape (not seen here) inserted
into the holes in the main tube from the outside to align the four (4)
nuts, I applied the mixed two-part epoxy around the cones and then
lower the nuts down onto the epoxied surface of the inside main tube.
Once aligned and seated properly, I added more epoxy around the sides
of the nuts to firmly affix the nuts to the inside walls of the main
tube. Fully cured, the nuts will provide an excellent means of
attaching the Vixen style dovetail bar to the main tube for the
Jaegers 4" f/8.6 refractor guide scope. |
|
