Jaegers 6" f/10 "GJD" OTA Construction - Main Tube (prepping for a guide scope - 6)
 

Sanding drilled holes for Guide Scope Bar - 6 - Inside Tube (Click to see an enlarged image.)

 
Continuing with the task of attaching the Vixen style dovetail bar to the main tube for mounting the Jaegers 4" f/8.6 guide scope, I started the process of sanding the area around the holes with 100-grit sandpaper in preparation to adhere the four (4) nuts to the inside of the main tube. Next, I will use progressive finer grits of sanding materials until I get to 600-grit. This task pretty much guarantees that the epoxy will permanent adhere the nuts to the main tube's interior.